Capture 1.x and Capture 2.x
2 posts
Page 1 of 1

Can capture record pre eq, pre fader individual channels and a main post eq, post fader track at the same time?

User avatar
by wahlerstudios on Mon Jan 02, 2017 12:12 pm
This is the normal setting. Unless you press the "Post EQ&Dyn"-button, you are recording inputs unprocessed, while the two more tracks (selectable) are always recorded processed. The "StudioLive AI Software Reference Manual" says in chapter 4.8.5: "Remember, all of these buses and inputs are automatically set to send their signals post-Fat Channel dynamics and post-EQ (where applicable)."

Capture is always and everywhere recording "pre-fader", which means that recording deals with signals on the digital bus inside the mixer.

SL16 | 32R | 16M

Apple routers | iPads | PreSonus SW5E & Motu AVB switches | Alesis iO Dock with AudioTools' Smaart RTA & Spectograph extension |
Yamaha S112, S15e, S10e, SM12, SM10 | Galaxy Audio Hot Spots | Mac mini | Studio One Pro 3.5.6

2 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 1 guest