I purchased a Audiobox 1818VSL to enable me to do some remote recording with my laptop. So far it's not been good with regard Zero Latency or Direct Monitoring.
I'm running latest software and firmware: - Universal Control 2.2.0.44119 - 1818VSL Firmware v1.48 - StudioOne Artist 3.5.1.43560 Q1. I don't see a Zero-Latency "Z" below my device in Studio One as per the Zero Latency Hand Book? Q2. Can I route inputs directly to outputs, (not via computer) I.e. Channel 1 Input to Channel 1 Output? Any help would be much appreciated. Cheers Damian |
What computer are you on?
My Website, Free Studio One Advance Training
SPECS: Win 11 22H2, 18 Core i9: 32Gb DDR4 ram, 42" 4K monitor, StudioLive 24/16, Faderport16, Central Station Plus, Sceptre 6, Sceptre 8, Temblor T10, Eris 4.5, HP60, Studio One Pro latest, Test Platforms Reaper latest, Cakewalk latest |
To get the "Z" (Zero Latency monitoring).
For PC only (not Mac): You need to un-install the Universal Control software, reboot, and then install the v1.3 VSL software from here: https://www.presonus.com/products/Audio ... /downloads NB. Also make sure the Audiobox is connected to your computer directly into a USB2 socket (not a USB3). That should do the trick. |
Users browsing this forum: No registered users and 2 guests