I am trying to set up my audio device. I purchased an AudioBox 44VSL to replace my audiobox usb. The 44VSL is not showing up in the drop down menu under the audio setup??? I is still showing my old audio interface. I successfully downloaded both the driver and the Studio Live VSL software.
Windows 7 Professional - 14GB Ram - i5- 1TB - 64bit
Seagate external drive (1TB) Studio One V.3 Professional Presonus Faderport Nektar Impact LX61 Presonus Audiobox 44VSL Tascam powered monitors Audio Technica Condenser Mic Shure SM57 & SM58 Dynamic Mics PRS Custom P2 24 Gibson Epiphone bass Taylor acoustic Roland Cube 80GX TC Helicon Voicelive3 |
Did the install go OK?
Can you open VSL?
My Website, Free Studio One Advance Training
SPECS: Win 11 23H2, 18 Core i9: 32Gb DDR4 ram, 42" 4K monitor, StudioLive 24/16, Faderport16, Central Station Plus, Sceptre 6, Sceptre 8, Temblor T10, Eris 4.5, HP60, Studio One Pro latest, Test Platforms Reaper latest, Cakewalk latest |
Yes, the install went well and I was able to open VSL. I think that maybe the image of the interface is just going to stay as what it was before. I've set up my I/O for the new ports and will be recording this morning for the first time. Hopefully all will go well. Another thing I noticed is that a "Z" appeared on the start page which looks to be a good sign as well. Will post back with an update later today.
Windows 7 Professional - 14GB Ram - i5- 1TB - 64bit
Seagate external drive (1TB) Studio One V.3 Professional Presonus Faderport Nektar Impact LX61 Presonus Audiobox 44VSL Tascam powered monitors Audio Technica Condenser Mic Shure SM57 & SM58 Dynamic Mics PRS Custom P2 24 Gibson Epiphone bass Taylor acoustic Roland Cube 80GX TC Helicon Voicelive3 |
I just recorded a quick track. Works just fine. My issue turned out to be a non issue. Thanks man and have a good one.
Windows 7 Professional - 14GB Ram - i5- 1TB - 64bit
Seagate external drive (1TB) Studio One V.3 Professional Presonus Faderport Nektar Impact LX61 Presonus Audiobox 44VSL Tascam powered monitors Audio Technica Condenser Mic Shure SM57 & SM58 Dynamic Mics PRS Custom P2 24 Gibson Epiphone bass Taylor acoustic Roland Cube 80GX TC Helicon Voicelive3 |
Yes, that can be a little confusing......in S1 no matter which member of the Audiobox family you have plugged in ti simply shows up in S1 as just "audiobox". But when you go to set up your I/O options you'll see all the I/O channels of whichever model AB you're using.
https://soundcloud.com/cristofe-chabot/sets/main
PC'S: HP XW6000 Dual 3.2GHz Intel Xeon, 8GB RAM WinXP SP2 HP 6005 Pro AMD Athalon X2 B24 3.0Ghz, 4GB RAM Win8 Pro Dell Latitude E6410 Laptop Intel i5 2.67Ghz 8GB RAM Win7 Pro x64 Audio Interfaces: Terratec EWS88MT PCI (2), Audiobox 1818VSL USB & Firestudio 26x26 Firewire, Line 6 PodXT, Roland GS-10, NI Rig Kontrol 3 Monitors: Yamaha HS50M's DAW: S1 3.2.1 Pro To add your software and hardware specs to your signature to make it easier for us to help you, click HERE. |
Users browsing this forum: No registered users and 7 guests