AudioBox 1818VSL, 44VSL and 22VSL
2 posts
Page 1 of 1
What is the line out3/4 track in the 44vsl mixer? I want to know if I can route any signal through it, but so far it seems like it's just there for looks. Anyone know what it is for? I would like to route an exclusive click track through it for my drummer. Thanks.
User avatar
by cristofe on Mon Apr 27, 2015 10:54 am
From the manual:

The AudioBox 44VSL has four line outputs to route to external devices, such as
headphone amps and DJ mixers. Outputs 1 and 2 share their playback streams with the Main Outs and the headphone output. Outputs 3 and 4 have independent playback streams.

Creating custom monitor mixes for your musicians is critical. If musicians
can’t hear themselves or their bandmates, their performance will suffer. A
monitor mix can be mono or stereo. Most often, an individual live monitor
mix is mono and is sent to a floor-wedge or sidefill monitor. (The obvious
exception is in-ear monitor systems.) A studio monitor mix is usually stereo
and is sent to a headphone amplifier, so it requires both a left- and a rightchannel
input. In both cases, the function of the aux bus is the same.
As an example, let’s create a mono monitor mix on Aux 1. To begin, click on the
Overview tab in VSL. Below the Fat Channel Microviews, you will see the send
level for this aux bus from each of the 16 channels. Keep in mind that the aux
mix is completely independent of the Main output. The sliders on each channel
control the channel send level to Aux 1. Use these sliders the same way that you
use the faders to set the output level to your main mix. Ask your musicians what
they would like in their monitor mix and use their requests as a starting point.

https://soundcloud.com/cristofe-chabot/sets/main

PC'S: HP XW6000 Dual 3.2GHz Intel Xeon, 8GB RAM WinXP SP2 HP 6005 Pro AMD Athalon X2 B24 3.0Ghz, 4GB RAM Win8 Pro Dell Latitude E6410 Laptop Intel i5 2.67Ghz 8GB RAM Win7 Pro x64 Audio Interfaces: Terratec EWS88MT PCI (2), Audiobox 1818VSL USB & Firestudio 26x26 Firewire, Line 6 PodXT, Roland GS-10, NI Rig Kontrol 3

Monitors: Yamaha HS50M's DAW: S1 3.2.1 Pro

To add your software and hardware specs to your signature to make it easier for us to help you, click HERE.

2 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 5 guests