2 posts
Page 1 of 1
I have a Firestudio 26x26 running on a Win7 (SP1) machine... when using the unit and connected to computer, everything works fine in the Universal Control 1.2, meaning all inputs are getting signal and outputs.... but when using a DAW thru firewire, to record multitrack (simultaneous), input 2 and input 6 are not getting any signal....

Please help....
User avatar
by cristofe on Fri Feb 23, 2018 3:15 pm
Well, if you're getting inputs on all channels in UC via fireware that has likely eliminated all culprits but ONE. It's your DAW. Something must not be set right in your DAW. Also a bit more info would be helpful.For instance you haven't told us which version of UC you're using. The 26x26 is a legacy machine and doesn't get on well with versions past 1.71. You also haven't told us which DAW you're using. That being said we can help you better now and in the future with a bit more info......if you will post your system specs in your signature, (see my sig), we will be better able to troubleshoot your problems. Without knowing what type of pc you're running, what OS you're using, what DAW etc....we often can't recommend a "simple fix"

If you have not already done so please READ THE MANUAL!


PC'S: HP XW6000 Dual 3.2GHz Intel Xeon, 8GB RAM WinXP SP2 HP 6005 Pro AMD Athalon X2 B24 3.0Ghz, 4GB RAM Win8 Pro Dell Latitude E6410 Laptop Intel i5 2.67Ghz 8GB RAM Win7 Pro x64 Audio Interfaces: Terratec EWS88MT PCI (2), Audiobox 1818VSL USB & Firestudio 26x26 Firewire, Line 6 PodXT, Roland GS-10, NI Rig Kontrol 3

Monitors: Yamaha HS50M's DAW: S1 3.2.1 Pro

To add your software and hardware specs to your signature to make it easier for us to help you, click HERE.

2 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 2 guests