13 posts
Page 1 of 1
I am using some pedals (On/Off, no 127 in-betweens) to activate and deactivate different effects on vocals while playing the piano. With most effects I'm able to make it work by using the mix and allowing it to go to either 0 or 100 but with reverb I want the mix to be at 0 when the pedal isn't pressed and at 25 when it is, I haven't found a way to do it. can someone help me?
User avatar
by Steve Carter on Fri Jul 29, 2022 10:57 pm
Are you playing live? Does this involve Studio One? If so what is your setup?

Seems that if the pedal is just for binary ‘on - off’ control then set the reverb to 25% in your mix so that when it’s off, it’s off and when it’s on, it’s set to your required value/level in the mix.

Apologies if I’ve missed the point.

Windows 10 Pro/i7 6800k @3.4Ghz/16Gb ram. Studio One 6 Pro, Melodyne Editor, Vocalign Project 5, Superior Drummer 3, Izotope Music Production Suite 6, Komplete 13 and various other plugins. Focusrite Saffire Pro 40, Faderport, Focal Alpha 50's, Korg Pa3x, Korg Pad Kontrol, numerous guitars, basses & other antiquated outboard gear.
Maybe one day I'll actually finish a project!
User avatar
by Tacman7 on Sat Jul 30, 2022 7:53 am
Welcome to the Forum!

You could set your reverb like you like it then use the pedal to enable or disable the plugin, or control the sends maybe.

Lot of different parameters to choose from, like here is send level and mute going to an fx channel.

AutoParms.jpg



Good to put your specs in your signature, click below in my signature.

Forum Moderator.
Please add your specs to your SIGNATURE.
Search the STUDIO ONE 6 ONLINE MANUAL. Access your MY.PRESONUS account.
OVERVIEW of how to get your issue fixed or the steps to create a SUPPORT TICKET.
Needs to include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce.


Studio OnePro6 Melodyne Studio
Win10 Ryzen 5 3600 - Motu M2
Ventura Mac Mini M2 - Zen Go TB
User avatar
by reggie1979beatz on Fri Aug 05, 2022 10:14 am
I too like the OP am wondering about this. Tacman's solution isn't registering, so this is an example of what I'd like to do:

If I have a controller (expression pedal, midi knobs, etc. ) I'd like a way to have the value be something other than off/on or the full enchilada. So it's unclear to me if you can do this with S1.

Can you set up the value to be let's say ... 20 to 90 instead of the full value? If so, what is the step by step procedure to do this? This would be very handy for filters (and controlling things with my expression pedal like wah)

Bye......:roll:
User avatar
by SwitchBack on Fri Aug 05, 2022 10:35 am
Depends on the virtual instrument and the parameter your pedal/wheel/... is linked to on that instrument. If that parameter controls a switch (e.g. 'mute') then on and off are the only two options. See if the instrument has a more appropriate parameter to link your pedal/wheel/... to (such as 'gain' i.s.o. 'mute').
User avatar
by reggie1979beatz on Fri Aug 05, 2022 10:42 am
Call me a dummy, but where do you do that? I've tried a variety of right click, and menu serching.

Bye......:roll:
User avatar
by SwitchBack on Fri Aug 05, 2022 11:32 am
From the menu Tacman posted? Not a MIDI expert myself at all but I guess you have to add MIDI CCs for each wheel and knob you want to use on your device and then link them to parameters on the VSTs you're using. Maybe the dry/wet control on that reverb?
User avatar
by reggie1979beatz on Fri Aug 05, 2022 11:38 am
Thanks, I'll keep looking at Tacman's gif and try to decipher it :lol:

Bye......:roll:
User avatar
by reggie1979beatz on Sun Aug 07, 2022 3:49 pm
Tacman7 wroteWelcome to the Forum!

You could set your reverb like you like it then use the pedal to enable or disable the plugin, or control the sends maybe.

Lot of different parameters to choose from, like here is send level and mute going to an fx channel.

AutoParms.jpg





UNCLE!!!!!!! How the (*&^&$ do you get to this screen ?

Bye......:roll:
User avatar
by Tacman7 on Sun Aug 07, 2022 9:29 pm
Looking at the arranger section hit the A key which gets you to automation mode.

Every track says display off, click that and down below is add/remove. That will get you to the parameter dialog.

So for the OP his hardware could switch a mute parameter for the reverb when it was not wanted. Then when it was wanted the reverb would already be set the way he wants it, possibly, there's other parameters to try to get what he's after.

Midi on and off values would be 0 to 63 = Off, 64 to 127 = On

Forum Moderator.
Please add your specs to your SIGNATURE.
Search the STUDIO ONE 6 ONLINE MANUAL. Access your MY.PRESONUS account.
OVERVIEW of how to get your issue fixed or the steps to create a SUPPORT TICKET.
Needs to include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce.


Studio OnePro6 Melodyne Studio
Win10 Ryzen 5 3600 - Motu M2
Ventura Mac Mini M2 - Zen Go TB
User avatar
by reggie1979beatz on Sun Aug 07, 2022 10:12 pm
Thanks for the instructions. That was easy (learn something every day)

But, I still can't figure out if I can make the parameter like 20 to 90. Let's say I have a controller (expression pedal, etc) and want a wah to be the above parameters instead of the full amount. Is there a way to do that?

Bye......:roll:
User avatar
by jazzundso on Mon Aug 08, 2022 2:43 am
Hey,

you can do this with the Channel Editor and Macro Controls.

- Add the effect you want to automate
- Open the Channel Editor for this channel/track
- Click the wrench to enter Macro Controls Mapping mode
- Here you can add parameters from all insert effects in this channel
- By clicking the curve, you can change the min and max value
- You can even change the curve
- You can add multiple parameters as well

Once you have assigned all parameters you want to automate to one Macro Control, you can automate this Macro Control via Control Link using any MIDI controller...

Image

Attachments
macro-controls.gif

Lukas Ruschitzka
Studio One Specialist
Advanced Studio One Tutorials || Free Studio One Scripts || Studio One Tutorial Database || Studio One Toolbox [ s1toolbox.com ]

Core i7 3.24 GHz, Windows 10, 24 GB RAM, RME HDSP 9632, PreSonus FaderPort, PreSonus Monitorstation, PreSonus Eris 5

Clavia Nord Stage 3 - Moog Sub 37 - YAMAHA MoXF6 - M-Audio Axiom Pro 61 - Kawai ES-920 - Studio One 5 - Notion 6 - Orchestral Tools Junkie XL Horns, ProjectSAM Symphobia, Cinematic Studio Series, Strezov Sampling Afflatus, VSL Synchron Special Edition, KOMPLETE 9 Ultimate
User avatar
by reggie1979beatz on Fri Aug 12, 2022 7:36 am
I'll check some other parameters again today, but it appears that my ONE THING I want to do this with isn't available for me :roll:

BTW, thank you for your very clear instructions!

Bye......:roll:

13 posts
Page 1 of 1

Who is online

Users browsing this forum: AAV and 104 guests