12 posts
Page 1 of 1
Hi All

It might be a bit early, but I guess this is a thread that will get opened sometime anyway.

Does anyone know how well S1 will run on Windows 11 when it comes out? Will it need another release or two of S1 to recover from problems that upgrading to a new OS will more than likely cause?

I imagine most drivers may need updating as well.

Thoughts, opinions and/or actual knowledge (guesswork too :D)?

...said Halo

Studio One Pro v4.6.2 / v5.5.2 / v6.5.2
Serum, Diva, Repro, Synthmaster, Syntronik Bully, MTron Pro, Kontakt 6/7, AIR synths, Cherry Audio synths, Battery 4, PPG Wave 3.V, Generate

3XS SQ170 Music Studio PC
Windows 10 x64 (22H2)
i7 8700 Hexcore 3.2GHz, 16GB, 2TB 970 EVO+ M.2 NVMe SSD + 1TB SATA HD
Scarlett 2i4 (G2), Korg Taktile 25, Faderport 2018, ATOM


Beyerdynamic DT990 Pros, JBL 305P II speakers
User avatar
by Vocalpoint on Tue Oct 05, 2021 8:16 am
leosutherland wroteThoughts, opinions and/or actual knowledge (guesswork too :D)?


I received my Win 11 ISO images early this morning and will begin testing soon.

The big takeaway (and frustration) for many in here will be the actual PC requirements - which indicate that if you are running a purchased PC (or specific components like CPU/TPM chip etc) older than say mid 2018 - you will not be able to use Win 11 anyways. It will not install. There are ways around that - but for some S1 users - that might be a bit too much tech to navigate.

For all those rocking that 5 year old Win 7/Win 10 rig - there will be choices and probably some grumbling to be had. But anyone running tech that old probably will not care about Win 11 anyway.

Me - I am all about maturity and stability and I see no reason to actually move to Win 11 for at least a year or more. It may take that long before the new OS is truly stable and usable.

I also received an update yesterday that Win 10 will have a couple more releases before it is finally retired in 2025. Win 10 has been nothing but perfect for my work and I see no reason to change that out at this point.

Cheers

VP

DAW: Studio One Pro 6.5.1.96553 | Host OS: Windows 10 Pro 22H2 | Motherboard: ASUS PRIME z790-A | CPU: Intel(R) Core(TM) i5-13600K | RAM: Corsair Vengeance LPX 64GB | Graphics: Intel UHD 770 (HDMI) | Audio Interface: RME UCX II (v1.246) | OS Drive : Samsung 990 PRO (1TB) | Media Drive: Samsung 970 EVO Plus (500GB) | Libraries: Samsung 970 EVO+ (2TB) | Samples : Seagate FireCuda (2TB) | Monitoring: Presonus Monitor Station v2 + Presonus Eris 5 | MIDI Control: Native Instruments Komplete S61 & Presonus ATOM
User avatar
by leosutherland on Tue Oct 05, 2021 10:08 am
Vocalpoint wroteMe - I am all about maturity and stability and I see no reason to actually move to Win 11 for at least a year or more. It may take that long before the new OS is truly stable and usable.

I'm of the same mind, actually, when it comes to considering my DAW machine - the old adage, if it ain't broke don't fix it - my system is about 3 years old now, but it is completely stable, and I've never had any Windows 10 related problems with running S1 (here we are talking 4.6.2) on it, atm I see no gain in updating it.

However, might be worthwhile upgrading my other GP machines, though praps not immediately.

But as a matter of interest if nothing else, I shall be checking both machines to see how suitable they are for Windows 11. Might even report back ;)

Just in case :thumbup:

...said Halo

Studio One Pro v4.6.2 / v5.5.2 / v6.5.2
Serum, Diva, Repro, Synthmaster, Syntronik Bully, MTron Pro, Kontakt 6/7, AIR synths, Cherry Audio synths, Battery 4, PPG Wave 3.V, Generate

3XS SQ170 Music Studio PC
Windows 10 x64 (22H2)
i7 8700 Hexcore 3.2GHz, 16GB, 2TB 970 EVO+ M.2 NVMe SSD + 1TB SATA HD
Scarlett 2i4 (G2), Korg Taktile 25, Faderport 2018, ATOM


Beyerdynamic DT990 Pros, JBL 305P II speakers
User avatar
by tomguenther on Tue Oct 05, 2021 11:00 am
tested already the last RC to check if everything is ok.
Test it since 5 days now - found no issues so far.

Core i7 11700k / GTX 760Ti / 32GB RAM / MSI z590m
Presonus Studio 1810C / Modal Argon8M / Cobalt8M / Korg Modwave
Presonus Sphere
Win 11
User avatar
by MisterE on Tue Oct 05, 2021 12:41 pm
FWIW installing a new version of Windows over an existing installation as opposed to a fresh install, which used to be considered a less desirable proposition, seems to have become less so in recent history. What I'm getting at it is all the reports I've read so far indicate whatever Win 10 drivers people have are being seen and used easily enough by Win 11. Which is not to say I recommend being the first guy on your block to upgrade, just that installing over a previous installation seems way less risky than it used to be.

I held off moving from Win 7 to Win 10 forever, then no sooner did I finally make the move than Microsoft announced Win 11! I'll be stuck for a while, though, cause the older placeholder graphics card I bought till prices come down isn't going to make the DirectX 12 cut.

AMD Ryzen 5600X CPU | Gigabyte B550 Vision D-P mobo | WD Black 2TB PCIe 4.0 NVME SSD | Crucial Ballistix 32GB 3600 mhz RAM | MSI Geforce 3060 Ti Gaming X | Win10 64-bit | S1 v6.0.2 | Mackie Onyx Blackbird interface | Korg M3 | Arturia Keylab 49 mkII
User avatar
by PreAl on Tue Oct 05, 2021 3:19 pm
Every single new Windows OS release, some people have no problems, others have problems problems problems. The problems may not be straight away, but after three or four monthly updates - bingo. I chuckle when I read the long threads of tales of woe, because I haven't upgraded and I'm perfectly fine.

If you value stability I would strongly recommend avoiding updating till at least six months after the full release, and ideally a year. By that time bugs are fixed, third party drivers and software will be updated and will have stabilized, and things will have settled.

Intel i9 9900K (Gigabyte Z390 DESIGNARE motherboard), 32GB RAM, EVGA Geforce 1070 (Nvidia drivers).
Dell Inspiron 7591 (2 in 1) 16Gb.
Studio One Pro 6.x, Windows 11 Pro 64 bit, also running it on Mac OS Catalina via dual boot (experimental).
Presonus Quantum 2626, Presonus Studio 26c, Focusrite Saffire Pro 40, Faderport Classic (1.45), Atom SQ, Atom Pad, Maschine Studio, Octapad SPD-30, Roland A300, a number of hardware synths.
User avatar
by Tacman7 on Wed Oct 06, 2021 6:44 am
I should be ready for a new computer and win11 by the time the wheels fall off this Ryzen.

https://support.presonus.com/hc/en-us/a ... s-Products

Forum Moderator.
Please add your specs to your SIGNATURE.
Search the STUDIO ONE 6 ONLINE MANUAL. Access your MY.PRESONUS account.
OVERVIEW of how to get your issue fixed or the steps to create a SUPPORT TICKET.
Needs to include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce.


Studio OnePro6 Melodyne Studio
Win10 Ryzen 5 3600 - Motu M2
Ventura Mac Mini M2 - Zen Go TB
User avatar
by PreAl on Wed Oct 06, 2021 7:41 am
Tacman7 wroteI should be ready for a new computer and win11 by the time the wheels fall off this Ryzen.

https://support.presonus.com/hc/en-us/a ... s-Products


Yes that's the only situation I would have windows 11, bundled with a new PC. But I would hold back as long as possible.

Intel i9 9900K (Gigabyte Z390 DESIGNARE motherboard), 32GB RAM, EVGA Geforce 1070 (Nvidia drivers).
Dell Inspiron 7591 (2 in 1) 16Gb.
Studio One Pro 6.x, Windows 11 Pro 64 bit, also running it on Mac OS Catalina via dual boot (experimental).
Presonus Quantum 2626, Presonus Studio 26c, Focusrite Saffire Pro 40, Faderport Classic (1.45), Atom SQ, Atom Pad, Maschine Studio, Octapad SPD-30, Roland A300, a number of hardware synths.
User avatar
by GMHague on Thu Oct 07, 2021 5:56 pm
Windows 11? I'm not even going 5.4 yet!

Windows 11 64 bit, 12th gen i5 eight core CPU, 32GB RAM, 1810C interface, SSD drive (system) and USB SSD for audio and samples.
Studio One 6.5, Latest UC driver
User avatar
by wolfgangkarp on Fri Oct 08, 2021 11:27 am
Look here https://forums.presonus.com/viewtopic.php?f=118&t=46007 and the last thread on this page

Windows 10; Studio One 5.4; AMD Ryzen Threadripper 1920X; 128 GB DDR4-2666, ROG ZENITH EXTREME ALPHA, NVIDIA 1070, 8 GB, 5x Samsung 980 500 GB NVMe M.2 on Board, RME HDSPe AIO + Word Clock Modul (WCM)
User avatar
by stevenericson on Fri Nov 26, 2021 7:05 am
I just downloaded windows11 on my brand new computer that I had built to basically guarantee that I wouldn't have any issues. Last night I was doing some recording and wanted to add some reverb from my abbey road collection from waves and the recording software locked up then shut down. I have rebooted the computer multiple times to correct but it keeps shutting down. Anyone else having these issues. If so anyone know how to fix it. Thanks
User avatar
by Vocalpoint on Fri Nov 26, 2021 4:44 pm
stevenericson wroteI just downloaded windows11 on my brand new computer that I had built to basically guarantee that I wouldn't have any issues. Last night I was doing some recording and wanted to add some reverb from my abbey road collection from waves and the recording software locked up then shut down. I have rebooted the computer multiple times to correct but it keeps shutting down. Anyone else having these issues. If so anyone know how to fix it. Thanks


Steve

Sorry to hear about the issues - but Studio One is not certified for Windows 11 yet - not sure if Presonus Support would look at your case at this early stage.

That said - there should be a dialog that pops up (after a crash) to load Studio One clean - as in no plugins - as that is what is most likely giving you grief. If that does not work - I have no other solutions since I do not have Win 11 in play.

Cheers

VP

DAW: Studio One Pro 6.5.1.96553 | Host OS: Windows 10 Pro 22H2 | Motherboard: ASUS PRIME z790-A | CPU: Intel(R) Core(TM) i5-13600K | RAM: Corsair Vengeance LPX 64GB | Graphics: Intel UHD 770 (HDMI) | Audio Interface: RME UCX II (v1.246) | OS Drive : Samsung 990 PRO (1TB) | Media Drive: Samsung 970 EVO Plus (500GB) | Libraries: Samsung 970 EVO+ (2TB) | Samples : Seagate FireCuda (2TB) | Monitoring: Presonus Monitor Station v2 + Presonus Eris 5 | MIDI Control: Native Instruments Komplete S61 & Presonus ATOM

12 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 63 guests