1 post
Page 1 of 1
Been scratching my head for a bit on this one. I have a kick drum which lacked some low end whack. So I created a new channel which has the tone generator @ 50Hz followed by an expander. The gate is triggered via sidechain from the kik. All works beautifully. Until I want to bounce that 50Hz kick to an audio file (the mix is in Mixbus 32c).

Of course, when I Ctrl-B, Alt-Ctrl-B or export the track stem the resulting file is silent because S1 effectively solo's that channel. Pre-fader send for the s/c doesn't help.

Anyone have a suggestion how I can get this to output to a wav file?

EDIT: Solved by the clever folk on the FB group: "Send the output of the tone generator to a bus. Create a new track with the input set to that bus. Record enable it and hit record."

Wood

Windows 10 (1909), i9 9900k, 32GB RAM, RME Babyface Pro, S1 Pro 4.6

1 post
Page 1 of 1

Who is online

Users browsing this forum: carlpearce and 14 guests