Hello Studio One Users,
this is the official discussion thread for the released Studio One 4.0.1 version. Here the release notes in the accouncement thread. https://forums.presonus.com/viewtopic.php?f=151&t=31009 have a good time! Ari
Ari Ahrendt - Quality Assurance Specialist
PreSonus Software Ltd. - Hamburg http://www.presonus.com/products/studio-one Modern electronic Synth Pop........../..........Musicproduction, Support & coaching http://www.denoisary.de/................./...........http://www.arimusik.de/ Windows 10 64-Bit, i7 6700k 4.0 GHz, 16GB RAM, 4TB SSD, Studio One 5 Professional |
AriAhrendt wroteHello Studio One Users, So the loudest issues in the forums were that the VST scanner would not reset correctly even after pressing the blacklist button, the workaround was to remove and then add the folder plugin paths. Often people would install plugins and the plugin would not appear until this is done. The other issue was Windows 7 users only whereby the VST scanner would crash. The workaround is to roll back nVidia drivers, Has this all been fixed? (Don't see it in the release notes may have missed it).
Intel i9 9900K (Gigabyte Z390 DESIGNARE motherboard), 32GB RAM, EVGA Geforce 1070 (Nvidia drivers).
Dell Inspiron 7591 (2 in 1) 16Gb. Studio One Pro 6.x, Windows 11 Pro 64 bit, also running it on Mac OS Catalina via dual boot (experimental). Presonus Quantum 2626, Presonus Studio 26c, Focusrite Saffire Pro 40, Faderport Classic (1.45), Atom SQ, Atom Pad, Maschine Studio, Octapad SPD-30, Roland A300, a number of hardware synths. |
BTW, not mentioned in the release notes (unless I missed it), is that Presonus has now implemented a subframe offset in the video engine as of this release 4.0.1. Thank you, Presonus!
This resolves a problem on Windows where videos of certain common codec settings were previously NOT frame accurate in the Presonus video engine... and now they ARE frame accurate, as of 4.0.1. Specifically, for example, MP4 video at 23.976 fps at common key frame settings, would NOT be frame accurate in Studio One 4.0.0 and 3.5.6, but now you can specify a "-1.1" offset in 4.0.1 and those videos will sync up perfectly! Thanks again, Presonus, this is actually very critical to people working with video files on Windows, and a hugely important fix! FYI -- this issue did not affect OSX users. |
About two weeks ago, I reported an issue to Kanghelm that the VST3 version of DC8C 3 wasn't updating it's latency correctly (VST2 version worked fine). Tony got in touch with the Presonus devs who resolved the issue in what was a beta build at that time, so I'm going to guess that there's an undocumented fix around latency reporting in VST3 plugins too.
AMD Ryzen 3950X, ASUS Creator x570 Mobo, 32GB HyperX Predator RAM (3600mhz), Radeon™ RX 5500 XT 4GB GDDR6 graphics card, RME Fireface 800, Windows 10 Pro, Studio One 5, Reaper 6, Cubase 10.5, Avid Artist Mix (EuCon please), Behringer X-Touch One, MIDI Fighter Twister, various other MIDI control surfaces and hardware instruments
|
PreAl wroteSo the loudest issues in the forums were that the VST scanner would not reset correctly even after pressing the blacklist button, the workaround was to remove and then add the folder plugin paths. Often people would install plugins and the plugin would not appear until this is done. Win7 scanning issue may have been fixed (one user reports it as fixed) but it is not in the release notes. The other scanning issue - no idea.
Intel i9 9900K (Gigabyte Z390 DESIGNARE motherboard), 32GB RAM, EVGA Geforce 1070 (Nvidia drivers).
Dell Inspiron 7591 (2 in 1) 16Gb. Studio One Pro 6.x, Windows 11 Pro 64 bit, also running it on Mac OS Catalina via dual boot (experimental). Presonus Quantum 2626, Presonus Studio 26c, Focusrite Saffire Pro 40, Faderport Classic (1.45), Atom SQ, Atom Pad, Maschine Studio, Octapad SPD-30, Roland A300, a number of hardware synths. |
According to them, all issues with vst scans were related to 3rd party issues. Some third partys have responded with fixes other have not.
My Website, Free Studio One Advance Training
SPECS: Win 11 22H2, 18 Core i9: 32Gb DDR4 ram, 42" 4K monitor, StudioLive 24/16, Faderport16, Central Station Plus, Sceptre 6, Sceptre 8, Temblor T10, Eris 4.5, HP60, Studio One Pro latest, Test Platforms Reaper latest, Cakewalk latest |
jpettit wroteAccording to them, all issues with vst scans were related to 3rd party issues. Some third partys have responded with fixes other have not. "Them" I assume is Presonus? 1) The windows 7 scan issue, I don't think Nvidia or MS has patched it. 2) The scanning issue which could be resolved by removing and adding a plugin path. That was effecting multiple plugins from different suppliers. None of them had issue under V3. So it does not look likely to be third party issues myself esp. if they've been resolved already. At least from my perspective it does not make sense.
Intel i9 9900K (Gigabyte Z390 DESIGNARE motherboard), 32GB RAM, EVGA Geforce 1070 (Nvidia drivers).
Dell Inspiron 7591 (2 in 1) 16Gb. Studio One Pro 6.x, Windows 11 Pro 64 bit, also running it on Mac OS Catalina via dual boot (experimental). Presonus Quantum 2626, Presonus Studio 26c, Focusrite Saffire Pro 40, Faderport Classic (1.45), Atom SQ, Atom Pad, Maschine Studio, Octapad SPD-30, Roland A300, a number of hardware synths. |
PreAl wrote <snip> Nvidia has an updated driver as of June 26th... That may or may not be related to it working for the one person who said they installed "the latest" (they didn't specify the version). Here's the Nvidia driver details: Version: 398.36 WHQL Release Date: 2018.6.26 http://www.nvidia.com/download/driverRe ... 5675/en-us There is a possibility it was fixed a couple weeks ago, but people didn't try it (or they didn't say it was fixed because they were convinced it was/is a PreSonus issue). No idea... until people report the version(s) that are working/not, there is no way to know.
Don
S1 v6.x Pro - latest version PreSonus Studio 26, IO 24, Atom Eris E5s iZotope RX10 Advanced Win 11 Pro-32GB RAM-AMD 3900x AMD 5700XT Windows 10 Pro-16 GB RAM MacOS Ventura (13.4) iMac i5 w 8 GB RAM FB group: Studio One Users-Audiobooks, VO and Podcaster focused: https://www.facebook.com/groups/StudioOneNarrationVO/ Studio One and iZotope RX Courses for Narrators/Podcasters/VO: https://www.VOJumpstart.com/ Studio One and iZotope RX Videos for Narrators/Podcasters/VO: https://www.youtube.com/user/RedBaarnsAudio |
donaldbaarns wrotePreAl wrote <snip> If you're not sure, why not try out the latest drivers and report back? If it doesn't work, rollback the drivers and let people know. It may take you twenty minutes to confirm. If I had an Nvidia card and a S1 v4, I'd give it a go myself.
AMD Ryzen 3950X, ASUS Creator x570 Mobo, 32GB HyperX Predator RAM (3600mhz), Radeon™ RX 5500 XT 4GB GDDR6 graphics card, RME Fireface 800, Windows 10 Pro, Studio One 5, Reaper 6, Cubase 10.5, Avid Artist Mix (EuCon please), Behringer X-Touch One, MIDI Fighter Twister, various other MIDI control surfaces and hardware instruments
|
^
Neither of us are on Windows 7 so I can't help. It's probably best left to the other thread.
Intel i9 9900K (Gigabyte Z390 DESIGNARE motherboard), 32GB RAM, EVGA Geforce 1070 (Nvidia drivers).
Dell Inspiron 7591 (2 in 1) 16Gb. Studio One Pro 6.x, Windows 11 Pro 64 bit, also running it on Mac OS Catalina via dual boot (experimental). Presonus Quantum 2626, Presonus Studio 26c, Focusrite Saffire Pro 40, Faderport Classic (1.45), Atom SQ, Atom Pad, Maschine Studio, Octapad SPD-30, Roland A300, a number of hardware synths. |
I've just checked.. first i installed the latest nvidia driver (398.36) and then ran studio one v4 .. same problem .
I rebooted and then installed the studio one update (4.0.1) .. same problem I then rolled back the nvidia drivers to previous state (388.59) no problem. Conclusion: The Win7 Plugin scan crash problem has NOT been fixed with this update. Let's hope they fix it soon Thankfully I run 2 machines, main machine is Win10 so no problems there. |
Just my opinion (I'm not a mod) but I think the Win7 plugin scan discussion should go here now:
viewtopic.php?f=151&t=30274&p=177944#p177944 We have one person on this thread saying it isn't fixed and one person on the original thread saying it is. We risk fragmenting the original discussion, and hijacking this thread a little. Thx.
Intel i9 9900K (Gigabyte Z390 DESIGNARE motherboard), 32GB RAM, EVGA Geforce 1070 (Nvidia drivers).
Dell Inspiron 7591 (2 in 1) 16Gb. Studio One Pro 6.x, Windows 11 Pro 64 bit, also running it on Mac OS Catalina via dual boot (experimental). Presonus Quantum 2626, Presonus Studio 26c, Focusrite Saffire Pro 40, Faderport Classic (1.45), Atom SQ, Atom Pad, Maschine Studio, Octapad SPD-30, Roland A300, a number of hardware synths. |
Keep in mind Presonus has no control over when third parties make a change.
My Website, Free Studio One Advance Training
SPECS: Win 11 22H2, 18 Core i9: 32Gb DDR4 ram, 42" 4K monitor, StudioLive 24/16, Faderport16, Central Station Plus, Sceptre 6, Sceptre 8, Temblor T10, Eris 4.5, HP60, Studio One Pro latest, Test Platforms Reaper latest, Cakewalk latest |
Mmmm...
See nothing in this release to get me salivating yet, seems mostly to be cosmetic fixes (not new features) maybe those details that they hadn't quite shoehorned into the programme prior to the v4 upgrade. Will most likely wait for v4.5 before crossing the stream - ymmv. Regards...
Windows 10 Pro/i7 6800k @3.4Ghz/16Gb ram. Studio One 6 Pro, Melodyne Editor, Vocalign Project 5, Superior Drummer 3, Izotope Music Production Suite 6, Komplete 13 and various other plugins. Focusrite Saffire Pro 40, Faderport, Focal Alpha 50's, Korg Pa3x, Korg Pad Kontrol, numerous guitars, basses & other antiquated outboard gear.
Maybe one day I'll actually finish a project! |
4.01 was a bug fix release.
My Website, Free Studio One Advance Training
SPECS: Win 11 22H2, 18 Core i9: 32Gb DDR4 ram, 42" 4K monitor, StudioLive 24/16, Faderport16, Central Station Plus, Sceptre 6, Sceptre 8, Temblor T10, Eris 4.5, HP60, Studio One Pro latest, Test Platforms Reaper latest, Cakewalk latest |
Yes - but it also says 'New Features'....!?
Regards...
Windows 10 Pro/i7 6800k @3.4Ghz/16Gb ram. Studio One 6 Pro, Melodyne Editor, Vocalign Project 5, Superior Drummer 3, Izotope Music Production Suite 6, Komplete 13 and various other plugins. Focusrite Saffire Pro 40, Faderport, Focal Alpha 50's, Korg Pa3x, Korg Pad Kontrol, numerous guitars, basses & other antiquated outboard gear.
Maybe one day I'll actually finish a project! |
Steve Carter wroteYes - but it also says 'New Features'....!? Read the release notes, these are minor/trivial and are all related to the last release. It's a bug fix release.
Intel i9 9900K (Gigabyte Z390 DESIGNARE motherboard), 32GB RAM, EVGA Geforce 1070 (Nvidia drivers).
Dell Inspiron 7591 (2 in 1) 16Gb. Studio One Pro 6.x, Windows 11 Pro 64 bit, also running it on Mac OS Catalina via dual boot (experimental). Presonus Quantum 2626, Presonus Studio 26c, Focusrite Saffire Pro 40, Faderport Classic (1.45), Atom SQ, Atom Pad, Maschine Studio, Octapad SPD-30, Roland A300, a number of hardware synths. |
Users browsing this forum: No registered users and 70 guests