17 posts
Page 1 of 1
Does not see my network

Using 192 studio one and pc windows 10

I am the KLOPS

http://WWW.KLOPSDRUMS.COM
The only HD guitar cabs on the Planet

Dual 23 inch HP TOUCHSCREENS
2.2 AMD 4 GIGS Ram windows 10
192 AND STUDIO ONE using 2.2 AMD with 8 GIGS Ram windows 10
User avatar
by pmsezztfs on Sat Aug 13, 2016 7:35 pm
Did you follow the steps outlined in this POST?


Michael Morgan | pearl hour project
---------------------------------------------------------------
Intel i7-2600 @ 3.4GHz | 16G ram
Windows 10 | Studio One v3.3.1 | Live 9.6 (all software 64 bit)
RME Fireface UFX | Nektar Panorama P1 | AKAI MPK25 | M-Audio Keystation 88 I Maschine 2 | Fader Port 8 ;)
User avatar
by joeydahlia on Mon Aug 15, 2016 3:07 pm
Yes...
Remote says..I don't have the correct studio one..
It does not support my version of studio one

I am the KLOPS

http://WWW.KLOPSDRUMS.COM
The only HD guitar cabs on the Planet

Dual 23 inch HP TOUCHSCREENS
2.2 AMD 4 GIGS Ram windows 10
192 AND STUDIO ONE using 2.2 AMD with 8 GIGS Ram windows 10
User avatar
by matthewgorman on Mon Aug 15, 2016 3:14 pm
What version of S1. I would also check firewall and make sure studioone.exe has an exception, and make sure the network setting in S1 preferences allows remote connection.

Even though the message references a version, 9 out of 10 times its a network issue

Matt

Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor

S1Pro V5
User avatar
by tovokas on Wed Aug 17, 2016 3:07 am
Just as a heads up, if you have VirtualBox installed on your Windows machine, you must take the following steps (found on an older thread), or the remote will never find Studio One:

Workaround -
1. Open up Network and Sharing Center
2. Click 'Change Adapter Settings'
3. Right click 'VirtualBox Host-Only Network', go to Properties
4. Double click "Internet Protocol Version 4 (TCP/IPv4)' under 'This connection uses the following items'.
5. In the Properties page, click "Advanced..."
6. In the "Advanced TCP/IP Settings", tab "IP Settings", uncheck the box marked "Automatic Metic" and type in 800 or higher.

OK all dialogs and run whatever software could not Recieve multicast.

The problem stems from Microsoft assigning interface Metrics based on the driver's own reported Link speed in Windows 7. Since that's all 1GB, there is a clash on metric.


I've suggested they add a note about VirtualBox to the flow chart, as it's a complete show-stopper unless you know about the fix.

M1 Mac Studio 32 Gigs/ i7 Windows
Mac Monterey/Windows 11
Tascam Model 12/Focusrite Scarlett 4i4 3rd Gen
Studio One 6.5 (Sphere) / Waveform 12.5
Plugins: Plugin Alliance, IK Multimedia,
Komplete 14, PSP
User avatar
by joeydahlia on Sun Aug 21, 2016 12:28 pm
it scans and sees s1 remote but error is not supported with my version ...i have s1 that comes with studio 192..

I am the KLOPS

http://WWW.KLOPSDRUMS.COM
The only HD guitar cabs on the Planet

Dual 23 inch HP TOUCHSCREENS
2.2 AMD 4 GIGS Ram windows 10
192 AND STUDIO ONE using 2.2 AMD with 8 GIGS Ram windows 10
User avatar
by Skip Jones on Sun Aug 21, 2016 4:33 pm
And the version of Studio One that came with your 192 is? If it came with Artist it is available as an add on, not available for Prime and comes with Pro. To me, this sounds like the issue.

Kind Regards
Skip

Skip

Please add your specs to your SIGNATURE.
Search the STUDIO ONE 4 ONLINE MANUAL. Access your MY.PRESONUS account.
OVERVIEW of how to get your issue fixed or the steps to create a SUPPORT TICKET.
Needs to include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce.


Windows 10 X 64 : AMD Phenom II X 4 945, ATI Radeon 5450 / 512 RAM - 8GB RAM / 1T SATA, Mac Mini (Late 2014), Faderport and Faderport 8, Yamaha S-08 Synth, Fishman TriplePlay Guitar MIDI, Logidy Controller, assorted PreSonus Gear
User avatar
by joeydahlia on Sun Aug 21, 2016 6:40 pm
Yeah...it's artist....
So yes or no with remote???
And I would need to upgrade to pro for remote to work

I am the KLOPS

http://WWW.KLOPSDRUMS.COM
The only HD guitar cabs on the Planet

Dual 23 inch HP TOUCHSCREENS
2.2 AMD 4 GIGS Ram windows 10
192 AND STUDIO ONE using 2.2 AMD with 8 GIGS Ram windows 10
User avatar
by Skip Jones on Sun Aug 21, 2016 7:10 pm
With Artist you will need the add on. Cheap. Here's a link https://shop.presonus.com/products/soft ... te-Support

Enjoy, Klops

Skip

Skip

Please add your specs to your SIGNATURE.
Search the STUDIO ONE 4 ONLINE MANUAL. Access your MY.PRESONUS account.
OVERVIEW of how to get your issue fixed or the steps to create a SUPPORT TICKET.
Needs to include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce.


Windows 10 X 64 : AMD Phenom II X 4 945, ATI Radeon 5450 / 512 RAM - 8GB RAM / 1T SATA, Mac Mini (Late 2014), Faderport and Faderport 8, Yamaha S-08 Synth, Fishman TriplePlay Guitar MIDI, Logidy Controller, assorted PreSonus Gear
User avatar
by joeydahlia on Sun Aug 21, 2016 7:13 pm
Ssssaaaaawwwweeeeeettttt..

That's fabulous...

I am the KLOPS

http://WWW.KLOPSDRUMS.COM
The only HD guitar cabs on the Planet

Dual 23 inch HP TOUCHSCREENS
2.2 AMD 4 GIGS Ram windows 10
192 AND STUDIO ONE using 2.2 AMD with 8 GIGS Ram windows 10
User avatar
by joeydahlia on Mon Aug 22, 2016 4:29 pm
Ok bought the add on...also created a ticket..
I downloaded the install but ..can't get past that..

Windows 10...it wants to open the file in a browser..

I am the KLOPS

http://WWW.KLOPSDRUMS.COM
The only HD guitar cabs on the Planet

Dual 23 inch HP TOUCHSCREENS
2.2 AMD 4 GIGS Ram windows 10
192 AND STUDIO ONE using 2.2 AMD with 8 GIGS Ram windows 10
User avatar
by joeydahlia on Tue Aug 23, 2016 5:08 am
Nevermind, all set..everything is ok..
Installation was on wrong pc..
But studio one remote..is working..
Awesomeness.....

I am the KLOPS

http://WWW.KLOPSDRUMS.COM
The only HD guitar cabs on the Planet

Dual 23 inch HP TOUCHSCREENS
2.2 AMD 4 GIGS Ram windows 10
192 AND STUDIO ONE using 2.2 AMD with 8 GIGS Ram windows 10
User avatar
by Skip Jones on Tue Aug 23, 2016 8:15 am
:+1

Skip

Please add your specs to your SIGNATURE.
Search the STUDIO ONE 4 ONLINE MANUAL. Access your MY.PRESONUS account.
OVERVIEW of how to get your issue fixed or the steps to create a SUPPORT TICKET.
Needs to include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce.


Windows 10 X 64 : AMD Phenom II X 4 945, ATI Radeon 5450 / 512 RAM - 8GB RAM / 1T SATA, Mac Mini (Late 2014), Faderport and Faderport 8, Yamaha S-08 Synth, Fishman TriplePlay Guitar MIDI, Logidy Controller, assorted PreSonus Gear
User avatar
by michelletellier on Wed Sep 14, 2016 11:13 am
Hi :!: just want to be sure Studio One Remote Support is compatible with iPad Mini. :?:

Thanks
User avatar
by matthewgorman on Wed Sep 14, 2016 11:18 am
It should be, but with more scrolling due to screen size. I would just download it, as the app itself is free. The only cost on the app, is if you are using Studio One Artist. If you are, then you need to purchase the add on for Artist in the Presonus shop at about $10 usd.

However, you don't need the add on to download and see the app, so try it first and see if its ok. Should work in demo mode

Matt

Lenovo ThinkServer TS140 Win 10 64bit, 8GB RAM, Intel Xeon
Lenovo Thinkpad E520, Windows 7 64bit, 8 GB RAM, Intel i5 Processor

S1Pro V5
User avatar
by michelletellier on Wed Sep 14, 2016 1:35 pm
Thank you Matt, i'll give it a try.
User avatar
by williamdahl on Mon Nov 29, 2021 4:16 pm
I have Studio one 5 artist and I have the remote on my LG gpad 5 10.1 tab. and it keeps telling me that artist is not supported. I see people talking about a add on but I cant find it. Any help would be great

17 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 101 guests