They are always on even at what i consider low volume level
|
Mine seemed like they were always on when mixing live music. It seemed compressed music (from my iTunes) didn't have the same problem. I stopped worrying about them.
I am Sir Melvis Bacon, Knight of BaconHam Palace.
Studio One 2 Pro 3.3.x (64 bit). MacBook Pro 13". OS X Sierra version 10.12.3. RM16AI and CS18AI connected in Stagebox mode via MOTU AVB Switch. StudioLive 328AI (x2); AudioBox 22 VSL; BlueTube DP V2; FaderPort; Monitor Station; RC 500; Temblor T10. To add your software and hardware specs to your signature to make it easier for us to help you, click HERE. My Website |
I had a gig last weekend and our sound technician had the excoursion limiter very often for not to say "always" on. The result was some smell and smoke out of a 328ai...
So I thought that should not happen through the voice coil temperature limiting. The sound before was not extreme loud and it did not sound noisy limited. |
michael.kroeger wroteI had a gig last weekend and our sound technician had the excoursion limiter very often for not to say "always" on. The result was some smell and smoke out of a 328ai... Sorry to resurrect this thread but I was searching and just found something that happened to my 315AI. So, did your 328AI worked after it cooled down or did you have to repair it? What did they find wrong and how was it fixed? Thank you.
Studiolive RM32AI, Studiolive 16.4.2AI, Studiolive CS18AI, Studiolive 32, Studiolive 32R, Studio One 3 Professional, 2 x Studiolive 315AI, 2 x Studiolive 18sAI, 2 x ULT15, 2 x ULT18, dbx DriveRack VENU360, 2 x Crown XTi6002, 4 x Crown XTi4000, 2 x Crown XLS2500, 2 x Carvin HD3000, 2 x Carvin LS1802, 2 x Yamaha SW118V, 4 x Yamaha S215V, 2 x Yamaha S115V, 4 x Yamaha SM15V, Windows 10 8gb, MacBook Pro 16gb, Waves Impact Server plus Diamond and Horizon plug-in bundles.
|
Sorry for answering so late, i did not see your post...
the speaker had to be repaired! the high-mid driver was blown and the amplifier module was defect! Thanks to the warranty i did not have to pay anything, but it took 4-5 week to get the parts here in germany. So i suggest to contact your local dealer/repair service. |
Finleyg wroteIt was done to replace the blown speakers but it solved the limiter problem as well, I now can drive the boxes full open with the output of my rm above 0 dbs and don't light up the limiter as often, and the spl output is higher than the orginal presonus drivers Which model did you get?
SL16.4.2Ai, SL312Ai mains, SL18Ai sub, Yorkville M810 Powered Mixed, Lenovo W530 Laptop (i-7 4-core @ 2.7 GHz, 24 GB RAM, 7200 rpm hard drive, 2-nd SSD, Win7 Pro 64 bit), Linksys WRT54GS router, Studio One Pro 3.2, Presonus Fader Port, HP-60 headphone amp, Furman PL-Plus power strip, all in a rolling SKB 2-piece case with A/V shelf.
|
Users browsing this forum: No registered users and 3 guests