Includes StudioLive 312Ai, 315Ai 328Ai and SL18sAi
5 posts
Page 1 of 1
Still having issues with one of my 315ai. I posted about it earlier, so I won't drone on.
Is there a way to reset the speaker to the original factory settings?
My thought was to roll back to factory settings then re-try the firmware update.
Thanks,
Rich
User avatar
by sjc193 on Mon Apr 11, 2016 2:07 pm
http://support.presonus.com/entries/669 ... structions

That is the best Info I could find on it, hope it helps, if you have recently updated the firmware via usb stick, go ahead and try it again, couldn't hurt

Steve

StudioLive RM32AI
Rackmount Windows 8.1 PC Quad core 8G ram
ASUS RT-N66U Dual Band Router
IPad2, IPad Air 2, Studio One 3 Pro, 1 DBX Driverack 260
2 QSC KW 153's, 2 Turbosound TMS-1's
2 OHM MR450D Subs with Kilomax 18inch drivers
4 EV ZLX-12P's, 1 TurboSound iX15, 2 Yamaha S115V's
1 Crest Pro-Lite 7.5 (7500 watts) amp, 2 Behringer EP4000 amps
10 58/57 mics, 1 SM86, 1 sE8, 1 sE2200, 1 AT2020, 2 AT2021
1 beta52 kick mic, 2 e609, 2 Radial J48 DI's, 1 PRO48 DI
2 4Bar lights, 1 4Play, 1 6Spot, 1 fog machine
User avatar
by RichStudio on Mon Apr 11, 2016 2:11 pm
Thanks Steve. I did all that. May mess with the speaker later today with an Ethernet cable connection.
Best,
Rich
User avatar
by rpark on Sat May 21, 2016 4:38 pm
I had a similar issue with a firmware, and kept working at it (re-downloaded a fresh copy of the firmware, used different thumb drives, etc). The speaker (a 328) eventually came back to life and sounds fine now. I am not positive what I was doing wrong, or finally did right. Just keep at it, sometimes it takes a while.
User avatar
by liviuvalentinpopa on Mon Sep 18, 2017 4:48 pm
how do I reset the presonus studiolive factory 315ai? I updated erroneously and all the lights were on and with a strange noise in the loudspeaker and no longer works-no more is heard than clicks I tried to update correctly after that but did not come back - please leave an urgent reply - thank you

5 posts
Page 1 of 1

Who is online

Users browsing this forum: No registered users and 3 guests