Before that Studio One 2.5 update, I was able to use the faders of every single channel during recording a pro with this setup:
From "Audio I/0 Setup" on Input open 16 input for every channel and from Outputs with main on the first 2 so 1-2, open 16 sub.
From the mixer of studio one after setting up for example voice o instrument on 4 channels an the output on sub 4, I was able to control the fader pre and pro recording, now with this new update of studio one 2.5 this trick doesn't work anymore (Don't know if is this the right reason or something else)
Is anybody can give some advice or show me how to do it again,
I'd like to control my recording from the mixer using the faders before and after increase the firmware button, now faders don't work at all with the main on 1-2 channel with firmware ON during recording an listen back.
This is a remake of Crazy Gnarls Barkley made with Studio One & Studio Live with all my arrangements and own production with collaboration of a remarkable singer and good friend of mine Martina Mastroddi.
Just because I'm still working on studio one to get the best of it., any advices and hear your thoughts are more than welcome.
How do I get a stereo track using studio one pre or pro mix down?
Muddy? Do you mean just a voice or pretty much everything.
For a rough mastering I used ozone 5.
I'm good on arrangements, but to use studio one I'm still working on it to get the best of it.